LAB XMEN Plant Growth Chamber is a chamber having three side illumination, humidity & temperature. It has applications in plant science, soil science &agriculture research etc. The use of plant growth chamber is to create artificial environment using combination of temperature, humidity and light at different set points for biological samples, electronic components and other relevant applications. These chambers are designed to meet the testing challenge of various industrial application such as aviation, air space, electronic components and material research.

Construction:

We construct the inner chamber of machine with thick gauge of stainless steel 304 & exterior with powder coated GI sheet for corrosion resistance surface. High density PUF insulation of 70mm is filled between inner and external walls. Main chamber is fabricated with arc welding. We construct sizes as small as 100 liters to 1200 liters or customize as per user requirement. Caster wheels with brake are fitted for easy movement.

Doors:

We use double door mechanism with inner door for observation which is fixed directly to the inner chamber that give you access to view plants inside without any variation in internal atmosphere. The exterior door is insulated and fixed with easy-to-use latches.

Temperature & Humidity:

The temperature range is 5°C to 60°C and humidity range is 50% to 90%. These parameters are controlled through HMI/PID controller with excellent accuracy and uniformity through PT100 temperature and capacitive humidity sensors. High Quality heaters are used for temperature. For humidity, stainless steel tank with immersion heater is used with automatic water filling facility.

Illumination:

Illumination plays important role in effective plant growth condition; therefore, we use high quality growth lights at three sides of the chamber. These lights are controlled through HMI/cyclic timer for 24X7 a week. These lights can be easily changed or replaced at user level.

Optional:

We also equiped our plant growth chambers with some advance features such as PLC based HMI controller. It features color touch screen having display and control of temperature and humidity with data monitoring and storage and also facility USB interface to transfer data into pen drive. 30mm port hole for external wires and validation are also available.

Safety Features:-

 Over heat temperature with alarm.

 Electrical overload compressor cut off.

 Time delay for compressor switch on.

 Electrical short circuit breaker.

Utilities (Pre Installation Requisite):-

 Room temperature around machine preferably at 25degree C.

 Stabilised input voltage of 230V Ac, 50 Hz, and 20 Amps.

 Contentious Water supply line.

 Water drains line with ½” Nozzle to be provided at floor level.

Ordering Information:-

Temp. Range: 5 deg C to + 60 deg C, Humidity range: 40 to 95% RH, Illumination environment simulation.

Model No.Capacity                                          Dimension In Cms  ShelvesWt. In KgPower
  Cu ft                   Lit  Chamber  Over AllOnly MachineWith packingVAC HzWatts
LXMPGC-121232460x60x9080x110x1553230320230,502500 
LXMPGC-161645060x60x12580x130x1754340430230,504000 
LXMPGC-212160060x80x12580x130x1955365465230,504000 
LXMPGC-282880080x80x125100x130x2105390500230,504500 
LXMPGC-3434100080x80x155100x130x2205430525230,504500 
Note: Apart from the above standard models, we also manufacture customised design with required specification as and when ordered.